125kN (12.5t) / B125 optional C250

Underfloor distributor CAMPETTO 6 consisting of a solid stainless steel construction (V2A/1.4301) optionally in the sizes 800x552mm or 650x452mm, gas pressure springs for fully automatic opening, manhole cover can be filled individually, distributor assembly according to customer requirements. The tray with a depth of 70mm can be filled individually to adapt to the environment. The cable outlet flap is built into the manhole cover frame (135x90mm).

The manhole cover is closed using a robust locking mechanism (snap lock) and can also be secured with a shackle lock. The cable outlet flap is secured with a double-bit lock. (Locking tool included in the scope of delivery).

The contractor must ensure that the substructure complies with the relevant standards, that the manhole is installed correctly and that there is appropriate drainage. The manhole cover is not watertight (surface water).

• Can be closed, walked on and driven over during operation
• Lid can be filled with surrounding material or tear plate
• Secured against unauthorized opening (vandal-proof!)
• Gas struts for a powerless, assisted opening process
• GIFAS solid rubber distribution system (protection class II)
• Fitting of the solid rubber distribution system individually according to customer requirements (electrical energy, compressed air, fresh and waste water as well as communication technology)
• Maximum operational safety down to – 40°C
• No condensation due to GIFAS solid rubber distributors
• Resistant to environmental influences
• Stainless steel construction, all metal parts made of V2A/1.4301
• Visible reflectors on the open lid system
• manifold fastening on the underside of the cover
• the solid rubber connection distributor is accessible when installed (E-Check – DGUVA3)
• Tray cover, lock and manifold are interchangeable
• Optional: frost-proof operation with lid heating, thermostat-controlled
• Optional: with immersion bell on request